Contact Our Sales Department directly at 1-800-242-7409
Email Us: Salesmn@milwaukeeinsulation.com
Adhesives, Mastics & Duct Sealants
Note: Not all items available at all locations (but we can get it)
| Click on links below for products | ||||
| Childers | Ductmate | Hardcast | Polymer | United McGill |
 |
Click on link to left to go to Childers' webpage. |
|
Name |
General Description |
Application Temp. |
Volatile Component |
Perm Rating |
Color |
|
CP-9 Ak-Cryl |
Economical weatherproofing breathing type mastic coating, tough, durable, fire-resistive. Used as mechanical protection & weatherproofing of thermal insulations, indoors and outdoors, for piping, tanks, vessels, equipment, and other irregularly shaped objects. |
-40°F to 180°F |
Water | White Special Colors Available | |
|
CP-10/11 Vi-Cryl |
Mastic weatherproofing breathing type coating, tough, durable, fire-resistive. Used as mechanical protection & weatherproofing of thermal insulations indoors and outdoors, for piping, tanks, fittings, vessels, equipment, and other irregularly shaped objects. |
-40°F to 180°F |
Water | Greater than 1.0 Perm for 1/16" Dry Film (Breather) | White Special Colors Available |
|
CP-30 Low Odor Chil-Perm |
Extremely effective low odor vapor barrier coating for low temperature interior applications. Combustible. Provides a tough, flexible dry film resistant to most acids and alkalis. Used over low temperature insulations (except polystyrene) for piping, fittings, tanks. Also used as a joint sealer at butt joints of insulation. |
-40°F to 190°F |
Solvent | Less than .02 Perms at .02 inch film thinckness | White |
|
CP-35 Chil-Perm WB |
A water based vapor barrier coating for low temperature interior applications. Provides a tough, flexible dry film. Used over all low temperature insulations for piping, fittings, tanks. Also used as a joint sealer at butt joints of insulation. Not recommended for ponded water areas. |
-20°F to 190°F |
Water | Less than .08 Perms at .055 inch film thinckness | White |
|
CP-50A MV1 Chil-Seal |
Combination coating and lagging adhesive. Non-flammable wet, fire-resistive dry. Used to adhere fabrics (canvas and brattice cloth) to round and rectangular insulated ductwork and to adhere laps of fabrics to themselves at underlying pipe insulations. |
-20°F to 180°F |
Water | 1.0 Perms | White |
|
CP-70 Chil-Joint |
Flexible sealant, flashing compound and vapor seal. Non-shrinking, skins over, permanently flexible. Used to vapor seal and act as an expansion joint in joints of cellular glass and cellular plastic insulations. And used as sealant for joints in metal curtainwall panels and sheets. |
-100°F to 300°F |
Solvent | Too small to measure through a 1" joint x 1/8" wide | Gray |
|
CP-82 Chil-Stix FRN |
A high-strength neoprene contact adhesive. Non-flammable in the wet state and fire-resistive dry. Used to bond impermeable surfaces together. Also used to adhere insulation (except polystyrene) to sheet metal and ductwork. |
-30°F to 200°F |
Solvent | Light Tan |
 |
Click on link to left to go to Ductmate's webpage. |
|
Name |
General Description |
Application Temp. |
Volatile Component |
Pressure Rating |
Color |
|
PROtack |
PROtack is a premium quality, fire retardant, water based duct liner adhesive. Used to bond fibrous duct liner insulation to galvanized ductwork, sealing cut edges of fiberglass insulation, bond kraft backed foil covering to fiberglass and urethane flat stock or pipe insulation, bond multiple layers of fibrous insulation board. |
45°F to 90°F |
Water |
|
White or Black |
|
PROseal |
PROseal is a premium water based high velocity duct sealant. Used to seal metal joints against air leaks in low, medium and high pressure duct systems. |
35°F to 110°F |
Water |
0" to 15" w.g. |
Gray |
|
SOLVseal |
SOLVseal is a premium solvent based high velocity duct sealant based on a blend of unique synthetic elastomers, select hydrocarbon resins and minerals. This blend results in a superior product that is unequaled in performance. |
0°F to 110°F |
Solvent |
0" to 15" w.g. |
Gray |
|
QUICK-STICK |
QUICK-STICK is a premium quality, pressure sensitive adhesive specially formulated for a quick permanent tack. |
60°F to 90°F |
Solvent |
|
Green |
|
|
Click on link to left to go to Hardcast's webpage. |
|
Name |
General Description |
Application Temp. |
Volatile Component |
Pressure Rating |
Color |
|
IRON-GRIP 601 |
A water based, synthetic resins duct sealant. Specially formulated to provide extended coverage and ease of application. |
35°F to 110°F |
Water |
0" to 10" w.g. |
Gray |
|
SURE-GRIP 404 |
A solvent based, synthetic rubber duct sealant. SURE-GRIP's low viscosity, no-drip, no-string formulation allows fast application for labor savings and extended coverage. |
35°F to 110°F |
Solvent |
0" to 10" w.g. |
Gray |
|
FLEX-GRIP 550 |
A water based, synthetic resins duct sealant. FLEX-GRIP has the ability to accommodate minor vibration and movement. |
35°F to 110°F |
Water |
0" to 10" w.g. |
Gray |
|
VERSA-GRIP 102 |
A versatile, all purpose duct sealant for use on all types of metal duct, glass fiber duct board, and flex duct, as well as duct fabric and flexible tubing runouts. VERSA-GRIP incorporates a built-in fiber reinforcement for exceptional strength, with UV inhibitors for extended outdoor exposure. |
35°F to 110°F |
Water |
0" to 10" w.g. |
White |
|
DUCT-SEAL 321 |
Duct-Seal 321 is an all purpose industrial grade duct sealant for all types of metal duct, glass fiber duct board, and flex duct, as well as duct fabric and flexible tubing runouts. Duct-Seal 321 includes UV inhibitors for extended outdoor exposure and built-in fiber reinforcement for exceptional strength. |
35°F to 110°F |
Water |
0" to 10" w.g. |
Gray |
|
GLAS-GRIP 636 |
A solvent based, flammable (wet), self extinguishing (dry) insulation adhesive. GLAS-GRIP 636 SE insulation adhesive offers exceptional strength, low viscosity for easy application. |
35°F to 110°F |
Solvent |
|
Red |
|
GLAS-GRIP 901 |
A water based, nonflammable insulation adhesive. GLAS-GRIP 901 is engineered for coil line applications. It offers exceptional strength, low viscosity, greater coverage and low suspended solids. |
35°F to 110°F |
Water |
|
Gray (wet) Black (dry) |
|
GLAS-GRIP 981 |
A fast tacking, low odor, rapid drying water based insulation adhesive. GLAS-GRIP 981's tack time rivals that of solvent based adhesives. Designed for use with the Hardcast adhesive pumping system. |
45°F to 110°F |
Water |
|
Tan |
|
LAG-GRIP 671 |
Exceptional vapor barrier characteristics for liquid chiller piper insulation applications. LAG-GRIP 671 can also be used to seal cut ends of fibrous glass duct liner, or to coat foam insulation. LAG-GRIP's exceptional strength and weather resistance provides application flexibility for indoor and outdoor applications. |
35°F to 110°F |
Water |
|
White |
 |
Click on link to left to go to Polymer's webpage. |
|
Name |
General Description |
Application Temp. |
Volatile Component |
Pressure Rating |
Color |
|
AIRSEAL #11 |
A premium water based duct sealant for indoor and outdoor use. Use Airseal #11 to seal all types of HVAC duct systems including metal (galvanized, aluminum, stainless), fiber glass ductboard, and flex duct. |
32°F to 110°F |
Water | 0" to 16" w.g. | Gray |
|
AIRSEAL #22 |
A water based duct sealant UL classified for indoor and outdoor use. Use Airseal #22 to seal all types of HVAC duct systems including metal (galvanized, aluminum, stainless), fiber glass ductboard, and flex duct. |
32°F to 110°F |
Water | 0" to 10" w.g. | Gray, White |
|
AIRSEAL #700 |
A high-velocity solvent-based duct sealant for indoor and outdoor use. Use Airseal #700 to pressure seal all types of HVAC duct systems including metal (galvanized, stainless), fiber-glass ductboard. |
22°F to 115°F |
Solvent | 0" to 16" w.g. | Gray |
|
AIR-TITE #444 |
A water based pumpalble seam sealant formulated for indoor and outdoor use. Eliminates the need to seal the outside of longitudinal seams. Use Air-Tite#444 to seal all types of metal HVAC duct systems, including galvanized, aluminum, stainless, that are assembled using Pittsburg, Rollformer, or Snap-Lock longitudinal seams. |
32°F to 110°F |
Water | 0" to 16" w.g. | Gray |
|
AERO-TACK |
Aerosol duct liner and general purpose adhesive. Use Aero-Tack as an adhesive to position and hold all types of insulation to metal, fiberglass, paper, and wood. |
20°F to 100°F |
Solvent | Clear | |
|
GLASSTACK #25 |
Water based duct liner adhesive. Use Glasstack #25 to adhere fiberglass duct liner to all types of rectangular metal HVAC duct systems (galvanized, aluminum, stainless). |
32°F to 110°F |
Water | Gray | |
|
GLASSTACK #35 |
Water based duct liner adhesive. Use Glasstack #35 to adhere fiberglass duct liner to all types of rectangular metal HVAC duct systems (galvanized, aluminum, stainless). |
35°F to 110°F |
Water |
Gray (dries black), White (dries clear) |
|
|
GLASSTACK #45 |
Water based UL Classified insulation adhesive. Glasstack #45 is a flexible adhesive formulated for use where fiberglass ductliner is moored or anchored to metal ductwork. |
35°F to 115°F |
Water | White, Black, Clear |
 |
Click on link to left to go to United McGill's webpage. |
|
Name |
General Description |
Application Temp. |
Volatile Component |
Pressure Rating |
Color |
|
UNITED DUCT SEALER |
United Duct Sealer has a high bonding strength for sure, first-time sealing of joints in low-, medium-, and high-pressure HVAC metal duct systems. It is suitable for indoor and outdoor applications. |
0°F to 120°F |
Solvent |
-40" to +40" w.g. |
Tan |
|
UNITED DUCT SEALER (WATER BASED) |
United Duct Sealer (Water Based) is specially formulated for sealing low-, medium-, and high-pressure duct systems. It provides excellent adhesion to galvanized metal and cures to a tough, flexible film. |
40°F to 110°F |
Water |
-40" to +40" w.g. |
Gray |
|
UNI-SEAL |
UNI-SEAL duct sealer is an economical, high-strength sealant for use on sheet metal duct systems. This medium-viscosity sealant is easy to apply. It dries quickly and remains flexible to provide a sure seal. |
0°F to 120°F |
Solvent |
-40" to +40" w.g. |
Light beige |
|
UNI-MASTIC 181 |
UNI-MASTIC 181 is a water-based product for sealing joints in all types of HVAC duct systems. It provides excellent adhesion to metal duct, fiberglass ductboard, and flexible duct. It dries quickly and remains flexible after it has cured. |
35°F to 120°F |
Water |
-10" to +10" w.g. |
Gray |
 |
Milwaukee Insulation WebMaster / Website Support: Marie Miskovich |
|
Milwaukee Insulation Webpage Design: Jim Lambrecht |
| [Home] | [About Us] | [Contact Us] | [Locations] | [Products] | [Catalog] |
